# Full-weld plate magnets up to 10,000 Gauss — Arrowmatics Magnets

> Agent-readable mirror. Canonical: https://magnets.com.my/plate-magnets.html · WhatsApp +60 12-211 2522

## Overview

Plate magnets with a typical surface field of **up to ~10,000 Gauss** (typical rating; confirm per application and air gap), built as **100% full-weld SS304/SS316 stainless steel** housings with continuous seal welds, no crevices, no gaps and no exposed fasteners on the product side. Weld seams are finished to a smooth, cleanable surface. Designed to **support your HACCP and ISO 22000** food-safety programme.

## Honesty note

Arrowmatics does not hold, and does not claim, ISO 22000 or HACCP certification for itself. These standards apply to the customer's food-safety management system and site. We supply fit-for-purpose, hygienic-design plate magnets that support the customer's programme; customers remain responsible for their own certification, hazard analysis and critical control point decisions.

## Key features

- Up to ~10,000 Gauss surface field (typical; depends on air gap, plate size and application)
- 100% full-weld construction, continuous seal welds
- No crevices, gaps or exposed fasteners on the product-contact face
- Smooth, cleanable finish on weld seams
- Food-grade stainless steel: SS304 standard, SS316 for corrosive products or washdown chemicals
- Easy-clean designs: hinged swing-open, suspended, quick-release / lift-out
- Custom sizes to chute, duct or conveyor drawing
- Ferrous foreign-body control at the point in the line selected by the customer's HACCP team

## Inspection and cleaning checklist

1. Isolate and make safe; keep steel tools clear of the magnet face
2. Open (hinged) or release (quick-release) the plate
3. Remove and record captured ferrous metal; investigate changes
4. Clean face and seams with the approved method and sanitiser
5. Inspect weld seams and face for dents, cracks, pitting or damage
6. Verify performance: cling/pull test or Gauss-meter reading if required
7. Close, refit, check latch and mounting, sign the log

## FAQ

**Are your plate magnets rated at 10,000 Gauss?** We can build plate magnets up to about 10,000 Gauss surface field (typical rating, not a guarantee for every build). Field at the product depends on air gap and plate size; we confirm per application.

**What does FULL WELD mean?** Continuous seal welds close the housing: no open seams, crevices or gaps, and no exposed screws or bolts on the product face. Seams are finished smooth and cleanable.

**Does it help with HACCP?** It is designed to support your HACCP programme as a hygienic ferrous foreign-body control. Your HACCP plan and validation remain your own.

**Is Arrowmatics ISO 22000 certified?** No, we do not claim that. ISO 22000 certifies a food safety management system at the customer's site; we supply hygienic-design equipment that supports it.

**SS304 or SS316?** SS304 as standard; SS316 for more corrosive products or washdown chemicals.

**How do we verify performance?** Visual inspection of face and welds, cling/pull test, and optional Gauss-meter reading, recorded in your own programme.

**Custom sizes?** Yes, to your drawing. Send a photo, sketch or dimensions.

## Quote

WhatsApp +60 12-211 2522 or email arrowmatics@gmail.com with product, chute/conveyor size, SS304 or SS316, quantity and industry. No published RM list prices.

## NAP

Arrowmatics AI Sdn Bhd (1305806-W) · No. 64, Jalan Kapar 27/89, Megah Industrial Park, Taman Alam Megah, Section 27, 40400 Shah Alam, Selangor, Malaysia · Office +603 5191 0299